INSTITUTE OF BLAST & IMPACT PROOF CONCRETE

Defence Industry

TO CONTROL THE PERIMETER OF INTEREST

CHECKPOINT

To strengthen the defence of the state border, reinforce the outer perimeters of military and civilian airports, reinforce the defence of bridges and important transit lines, reinforce the defence of critical and civilian infrastructure.

Ability to respond quickly to defined threats in the event of an emergency, national emergency, and state of war.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

Dimensions of the basic segment:

Clear width: 2.5 m
Clear height: 2.5 m
Length: 2 m
Wall thickness: 20 cm

Length of segment + lid: 3 m
Weight of base segment: 9.8 t
Total weight: 10.5 t
Capacity: 1-3 men
Assembly: up to 2 h by one team

Crane 10 t, transport one freight wagon.

Shotguns and portholes without fittings.
The basic skeleton can be equipped according to the client’s requirements (beds, benches, chemical toilet, cartridge traps, ammunition and food storage boxes).

MOBILE WALL TO PROTECT OBJECTS

T - WALL

For fast establish of high level of security for military and civilian objects. To reinforce the defense of internal perimeters, access roads of urban centers, to control release points, before objects entrances or vehicle access control.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

Dimensions of the basic segment:

Clear width: 2,25 m
Clear height: 2,7 m
Length: 1,6 m

MOBILE BUNKER WITH THREE LOOPHOLES

MILITARY LIGHT

The mobile bunker is a composite made of ultra-high performance concrete with dispersed microfiber reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC high strength steel.

Ability to respond quickly to defined threats in the event of an emergency, national emergency, and state of war.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

Clear width: 2.5 m
Clear height: 2,5 m
Length: 2 m
Wall thickness: 20 cm

Length of 5 segments: 10 m + lids (total 10.5 m)
Weight of base segment: 9.8 t
Total weight: 50 t
Capacity: 8-10 men
Assembly: within 24 h by one team

Crane 10 t, transport one freight wagon.

Shotguns and portholes without fittings.
The basic skeleton can be equipped according to the client’s requirements (beds, benches, chemical toilet, shell traps, ammunition and food storage boxes, compressed air bottles and breathing apparatus).

SECURITY OF REAR STATIONS

DEFENSE MOBIL

The Emergency Shelter is a composite made of ultra-high performance concrete with dispersed microfiber reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC high strength steel.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

Dimensions of the basic segment:

Clear width: 2.5 m
Clear height: 2.5 m
Length: 2 m
Wall thickness: 20 cm

Length of 5 segments: 10 m + lids (total 10.5 m)
Weight of base segment: 9.8 t
Total weight: 50 t
Capacity: one team of 8-10 men
Assembly: within 24 h by one team

Crane 10 t, transport one freight wagon.

  • EMERGENCY
  • SHELTER
  • WAREHOUSE
  • HEADQUARTERS, NEWS, INTELLIGENCE AGENCY
  • ACCOMMODATION FOR FIRST LINE CREWS
  • A HARDENED PART OF A MOBILE HOSPITAL
  • GENERATORS
  • SUPPLY DEPOT
  • LAUNDRY
TO RESCUE THE CREW

PANIC ROOM

Panic Room is a composite made of ultra-high-value concrete with dispersed microfiber reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC high strength steel.

Ability to respond quickly to defined threats in the event of an emergency, national emergency, and state of war.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

Clear width*height: 2,5*2,5 m
Length: 2 m
Wall thickness: 20 cm
Length of segment + lid: 3 m
Weight of base segment: 9.8 t (total 12 t)
Capacity: 1-3 men
Bulletproof armoured door and escape hatch.
On-site assembly within 24 h, connection to power; in case of their disablement, separate island system for 48-72 h
Crane 10 tons, transport one freight car or truck.

The basic skeleton can be equipped according to the client’s requirements:
  • Ventilation or filter ventilation, first-class filtration against combat gases or nuclear fallout, in case of power failure on manual drive
  • Air heating
  • Back-up breathing from compressed air cylinders
  • Anti-blast valve
  • Beds, benches, chemical toilet
  • Canisters for water and dehydrated food supplies
  • Sensor, CO₂
  • Camera system;
  • Connection to the surrounding broadcasting station;
  • Two main and one backup battery;
  • Generator to recharge the batteries, exhaust with check valve;
  • Fire and gas sensors;
  • Fire extinguisher, first aid kit;
  • Individual equipment according to the client’s request.
CIVIL DEFENCE SYSTEM

TUNNEL TO PROTECT CABLES OF HIGH PRIORITY

High priority cable tunnels is a system used to protect power lines, fiber optic cables and IOT technology system.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

LIGHT – Wall thickness – 100 mm

HEAVY – Wall thickness – 200 mm

Technical data of the whole safety element including the hatch:

Width: 0.86 m
Height: 0.93 m
Length: 1 m
Weight: 0.5 t

Clear height of safety element:

Width: 0.5 m
Height: 0.5 m

The safety element is usually placed one behind the other under the surface, the connection of the elements is ensured by a tongue at one end and a groove at the opposite end. A cover hatch designed to cover the tunnel. The plate is fitted with an internal tongue fitting into the groove thus securing the position of the plate.

TO STOP TANKS, CARS, TRACKED COMBAT VEHICLES

MOBILE ROADBLOCK

The Pyramid mobile barrier system consists of a composite made of ultra-high performance concrete with dispersed microfibre reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE- UHPFRC.

The safety element is a casting of UHPFRC concrete composite with dispersed microfibre reinforcement of high-strength steel is a safety element certified by the Military Research Institute s.p. and the State Testing Institute of the Czech Technical University in Prague.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

PYRAMID – SMALL
Edge length: 0.6 m
Level N1G, 3.5 t vehicle at 80 km/h

PYRAMID – MEDIUM
Edge length: 1 m
Level N2, 7.5 t vehicle at 80 km/h

PYRAMID – LARGE
Edge length: 1.35 m
Level N3, 7.5 t car at 80 km/h

TO SEIZE OBJECTS OF UNKNOWN ORIGIN

THE CIRCLE SHIELD

The Circular Shield restraint segment system consists of a composite made of ultra-high performance concrete with dispersed microfibre reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC high strength steel.

The safety element is a casting made of UHPFRC concrete composite with dispersed microfibre reinforcement of high-strength steel, it is a safety element certified by the Military Research Institute s.p. and the State Testing Institute of the Czech Technical University in Prague.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

ROUND SHIELD – SMALL

Medium Ø: 1 m
Wall height: 530 mm
Segment weight: 170 kg

CIRCULAR SHIELD – LARGE
Medium Ø: 2 m
Wall height: 1,130 mm
Segment weight: 461 kg

TO REPAIR THE SURFACE OF A RUNWAY OR MOTORWAY SURFACE

MIXTURE OF UHPFRC

The UHPFRC mix can be used to create a composite made of ultra-high performance concrete with dispersed microfiber reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6
  • It speeds up the repair process and reduces lead times.
  • Saves on the number of staff required.
  • Saves money by reducing lead times and staff.
  • Resists tensile stress even after a crack has formed.
  • Omnidirectional dispersion of reinforcement, mechanical resistance the same in all directions.
  • Tough material resistant to dynamic effects.
  • Lower volume changes from shrinkage.
  • Excellent resistance to sanitation.
  • Runway with the highest residual strength requirement of Class A.
  • For civil and military airports. Designed for rapid repair of damaged runways.
  • In plastic 30 kg bags with plastificker and processing instructions.
Manufacturer of steel components
Science, research and development
Testing and expert activities
Reference partner
State support B2B
Manufacturer of concrete components
NATO standarts
Project and design
Protection of intellectual property
State support B2G