INSTITUTE OF BLAST & IMPACT PROOF CONCRETE

Civil Defence

LIFE PROTECTION

BALLISTIC BENCH

To strengthen the defence of the inner perimeters of military and civilian airports, protection of foreign embassies, public administration buildings, access roads to urban centres, defence of critical infrastructure, both military and civilian.

It serves as a durable shelter in event of terrorist attack, sabotage, attack by professional army, other attack or disaster.

Anchored to the ground stops a car.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6
  • SINGULAR – Placement in an open space with the backrests parallel to each other with a spacing of 10-90 cm.
  • MODULAR – By placing interconnected safety benches side by side, the row of benches can be adjusted to any length depending on the number of seats required.

Safety bench with the backrest strength of 100mm.

Width: 0,65 m 

Height: 1,1 m

Length: 1,2 m

Backrest strength: 0,1 m

Weight: 625 kg

It is recommended to arrange two safety benches with their backrests parallel to each other with a spacing of 10-90 cm. In this arrangement, they have the ability to intercept grenade or mine fragments, trap and redirect the pressure wave released by the explosion, and at the same time prevent the penetration of a round up to 7.62 x 54R/B32 API and 7.62 x 51/AP8 WC in the LIGHT version, or 12.7 x 99/API M8 and 14.5 x 114/API/B32 in HEAVY version.

the mobile safety barrier

FLOWER BOX

The mobile safety barrier is a protective element certified by the Military Research Institute s.p. It is designed primarily for the protection of objects important for the defence of the state, critical infrastructure and the city intravilans, outdoor and enclosed public spaces, terminals and places with high concentration of people and at the same time low security against violent attack.

The element is designed for short-term and permanent installation in the extravillane, where it acts as a mechanical barrier limiting the penetration of vehicles into protected areas. The element can be fitted with common types of urban greenery and its aesthetic expression can be freely modified and shaped according to the customer’s requirements, and It can be subtly incorporated into other exterior elements.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

Option A – permanent installation
The product consists of two parts:
1. The flower box.
2. 2.

Option B – removable installed
It consists of three elements:
1. Removable Flower Box.
2. 2.
3. The permanently installed base anchor plate.
In case of deinstallation of both removable parts, the opening is provided with a running cover.

1/ Safety barrier:
Width: 0.8 m

Length: 2.5 m

Height: 1.05 m

Weight: 2.8 t

2/ Anchor plate:
Width: 1.8 m

Height: 1.2 m

Underground embedment depth: 0.9 m

Weight: 1.2 t

3/ Locking spacer:
Structural steel plate with increased resistance.

4/ Base plate:
Width: 1.2 m

Length: 2.6 m

The dimensions of the foundation anchorage plate and the fixing plate are always determined individually, the size of the sides being chosen depending on the quality of the subsoil, its geomechanical properties and the required depth of installation.

The lining pieces are bolted to the product around the perimeter using a base, form-fitted strip steel.

SHIELDS FOR REINFORCEMENT OF BUILIDNGS

BALLISTIC SHIELD

Shields to harden buildings are intended for buildings that are politically, militarily or economically important for the defence of the state, especially for the security of the basic functions of the state and the security of the armed forces and intended primarily to protect objects important for the defence of the state, critical infrastructure.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

LIGHT – Wall thickness – 100 mm

HEAVY – Wall thickness – 200 mm

Width: 0.5 m
Height: 0.5 m
Length: 0.5 m
Weight: 130 kg
Wall thickness: 0.2 m

CIVIL DEFENCE SYSTEM

TUNNEL TO PROTECT CABELS OF HIGH PRIORITY - LIGHT

High priority cable tunnels is a system used to protect power lines, fiber optic cables and IOT technology system.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

LIGHT – 90 mm

HEAVY – Wall thickness – 180 mm

Technical data of the whole safety element including the hatch:

Width: 0.86 m
Height: 0.93 m
Length: 1 m
Weight: 0.5 t

Clear height of safety element:

Width: 0.5 m
Height: 0.5 m

The safety element is usually placed one behind the other under the surface, the connection of the elements is ensured by a tongue at one end and a groove at the opposite end. A cover hatch designed to cover the tunnel. The plate is fitted with an internal tongue fitting into the groove thus securing the position of the plate.

TO CONTROL THE PERIMETER OF INTEREST

CHECKPOINT

To strengthen the defence of the state border, reinforce the outer perimeters of military and civilian airports, reinforce the defence of bridges and important transit lines, reinforce the defence of critical and civilian infrastructure.

Ability to respond quickly to defined threats in the event of an emergency, national emergency, and state of war.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

Dimensions of the basic segment:

Clear width: 2.5 m
Clear height: 2.5 m
Length: 2 m
Wall thickness: 20 cm

Length of segment + lid: 3 m
Weight of base segment: 9.8 t
Total weight: 10.5 t
Capacity: 1-3 men
Assembly: up to 2 h by one team

Crane 10 t, transport one freight wagon.

Shotguns and portholes without fittings.
The basic skeleton can be equipped according to the client’s requirements (beds, benches, chemical toilet, cartridge traps, ammunition and food storage boxes).

TO STOP TANKS, CARS, TRACKED COMBAT VEHICLES

MOBILE ROADBLOCK

The Pyramid mobile barrier system consists of a composite made of ultra-high performance concrete with dispersed microfibre reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE- UHPFRC.

The safety element is a casting of UHPFRC concrete composite with dispersed microfibre reinforcement of high-strength steel is a safety element certified by the Military Research Institute s.p. and the State Testing Institute of the Czech Technical University in Prague.

  • Balistic resistance A5
  • Shrapnel resistance C4
  • Blast resistance D6

PYRAMID – SMALL
Edge length: 0.6 m
Level N1G, 3.5 t vehicle at 80 km/h

PYRAMID – MEDIUM
Edge length: 1 m
Level N2, 7.5 t vehicle at 80 km/h

PYRAMID – LARGE
Edge length: 1.35 m
Level N3, 7.5 t car at 80 km/h

Manufacturer of steel components
Science, research and development
Testing and expert activities
Reference partner
State support B2B
Manufacturer of concrete components
NATO standarts
Project and design
Protection of intellectual property
State support B2G