Menu
Menu
Previous
Next
LIFE PROTECTION
BALLISTIC BENCH
Critical infrastructure | Civil defence
To strengthen the defence of the inner perimeters of military and civilian airports, protection of foreign embassies, public administration buildings, access roads to urban centres, defence of critical infrastructure, both military and civilian.
It serves as a durable shelter in event of terrorist attack, sabotage, attack by professional army, other attack or disaster.
Anchored to the ground stops a car.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
- SINGULAR – Placement in an open space with the backrests parallel to each other with a spacing of 10-90 cm.
MODULAR – By placing interconnected safety benches side by side, the row of benches can be adjusted to any length depending on the number of seats required.
Safety bench with the backrest strength of 100mm.
Width: 0,65 m
Height: 1,1 m
Length: 1,2 m
Backrest strength: 0,1 m
Weight: 625 kg
It is recommended to arrange two safety benches with their backrests parallel to each other with a spacing of 10-90 cm. In this arrangement, they have the ability to intercept grenade or mine fragments, trap and redirect the pressure wave released by the explosion, and at the same time prevent the penetration of a round up to 7.62 x 54R/B32 API and 7.62 x 51/AP8 WC in the LIGHT version, or 12.7 x 99/API M8 and 14.5 x 114/API/B32 in HEAVY version.
Previous
Next
K USKLADNĚNÍ VOJENSKÝCH ZÁSOB A TECHNIKY
AMMO BUNKR
K bezpečnému uchování střeliva a munice před útoky dronů, palebným útokem, dělostřeleckou palbou a granáty.
Tři univerzální stavební segmenty tvoří tubus uzavřený z jedné strany víkem, z druhé strany otevřený pro rychlý přístup a manipulaci. Bez střílen a průzorů. Konstrukce objemu 30 tun poskytuje dodatečnou zádržnou hmotu. V případě exploze skladovaného materiálu usměrní tlakovou vlnu ve směru ven z tubusu, a sníží nebezpečí rozletu betonových částí po okolí. Vybudovaný ochranný val kolem Bunkru z pytlů s pískem omezí rychlost střel, sekundárních střepin a rázové tlakové vlny. Vnitřní objem 28m3. Výhodou rychlá montáž modulárního systému.
- Balistická odolnost A5
- Střepinová odolnost C4
- Výbuchová odolnost D6
Rozměry základního segmentu:
Světlá šířka: 2,5 m
Světlá výška: 2,5 m
Délka: 2 m
Síla stěny: 20 cm
Délka segmentu + víka: 3 m
Hmotnost základního segmentu: 9,8 t
Hmotnost celkem: 10, 5 t
Kapacita: 1-3 muži
Montáž: do 2 h jedním družstvem
Jeřáb 10 t, doprava jeden nákladní vagón.
Střílny a průzory bez osazení
Základní skelet možno vybavit dle požadavku klienta (postele, lavice, chemické WC, lapače nábojnic, bednami na zásoby munice a potravin).
Previous
Next
the mobile safety barrier
FLOWER BOX
Critical infrastructure | Civil defence
The mobile safety barrier is a protective element certified by the Military Research Institute s.p. It is designed primarily for the protection of objects important for the defence of the state, critical infrastructure and the city intravilans, outdoor and enclosed public spaces, terminals and places with high concentration of people and at the same time low security against violent attack.
The element is designed for short-term and permanent installation in the extravillane, where it acts as a mechanical barrier limiting the penetration of vehicles into protected areas. The element can be fitted with common types of urban greenery and its aesthetic expression can be freely modified and shaped according to the customer’s requirements, and It can be subtly incorporated into other exterior elements.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
Option A – permanent installation
The product consists of two parts:
1. The flower box.
2. 2.
Option B – removable installed
It consists of three elements:
1. Removable Flower Box.
2. 2.
3. The permanently installed base anchor plate.
In case of deinstallation of both removable parts, the opening is provided with a running cover.
1/ Safety barrier:
Width: 0.8 m
Length: 2.5 m
Height: 1.05 m
Weight: 2.8 t
2/ Anchor plate:
Width: 1.8 m
Height: 1.2 m
Underground embedment depth: 0.9 m
Weight: 1.2 t
3/ Locking spacer:
Structural steel plate with increased resistance.
4/ Base plate:
Width: 1.2 m
Length: 2.6 m
The dimensions of the foundation anchorage plate and the fixing plate are always determined individually, the size of the sides being chosen depending on the quality of the subsoil, its geomechanical properties and the required depth of installation.
The lining pieces are bolted to the product around the perimeter using a base, form-fitted strip steel.
Previous
Next
MOBILE WALL TO PROTECT OBJECTS
T - WALL
For fast establish of high level of security for military and civilian objects. To reinforce the defense of internal perimeters, access roads of urban centers, to control release points, before objects entrances or vehicle access control.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
Dimensions of the basic segment:
Clear width: 2,25 m
Clear height: 2,7 m
Length: 1,6 m
Previous
Next
SAFETY WALL TO PROTECT OBJECTS
BALLISTIC WALL
Critical infrastructure
It is primarily designed to protect critical infrastructure objects, possible attacks or high priority. In the event of damage, the protective element is relatively easy to repair using standardized and interchangeable elements. Fully impermeable, this configuration is suitable for heights up to 6 m.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
Dimensions of one segment:
Concrete slab size: 1 x 1.5 m
Height: 4 m
Length: 4.5 m
Wall thickness: 20 cm
Weight (whole safety element including base): 13.8 t
Depth of foundation): 2.5 m
In this configuration, less material is needed and construction is slightly faster overall, but the wall must withstand a higher reflected pressure in the event of an explosion.
The safety wall is assembled from UHPFRC composite panels that are inserted successively into the holders of the HEB rolled steel profile columns. The steel sleeves are connected to each other by a spacer element and anchored together in the concrete footings to a depth of 2.5m. The space between the steel column and the sleeve is filled with permanently flexible rubber granulate.
Previous
Next
SHIELDS FOR REINFORCEMENT OF BUILDINGS
BALLISTIC SHIELDS
Critical infrastructure | Civil defence
Shields to harden buildings are intended for buildings that are politically, militarily or economically important for the defence of the state, especially for the security of the basic functions of the state and the security of the armed forces and intended primarily to protect objects important for the defence of the state, critical infrastructure.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
LIGHT – Wall thickness – 100 mm
HEAVY – Wall thickness – 200 mm
Width: 0.5 m
Height: 0.5 m
Length: 0.5 m
Weight: 130 kg
Previous
Next
CIVIL DEFENCE SYSTEM
TUNNEL TO PROTECT CABELS OF HIGH PRIORITY
Defence industry | Critical infrastructure | Civil defence
High priority cable tunnels is a system used to protect power lines, fiber optic cables and IOT technology system.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
Technical data of the whole safety element including the hatch:
Width: 0.86 m
Height: 0.93 m
Length: 1 m
Wall thickness: 10 cm
Weight: 0.5 t
Clear height of safety element:
Width: 0.5 m
Height: 0.5 m
The safety element is usually placed one behind the other under the surface, the connection of the elements is ensured by a tongue at one end and a groove at the opposite end. A cover hatch designed to cover the tunnel. The plate is fitted with an internal tongue fitting into the groove thus securing the position of the plate.
Previous
Next
TO STOP TANKS, CARS, TRACKED COMBAT VEHICLES
MOBILE ROADBLOCK
Defence industry | Critical infrastructure | Civil defence
The Pyramid mobile barrier system consists of a composite made of ultra-high performance concrete with dispersed microfibre reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE- UHPFRC.
The safety element is a casting of UHPFRC concrete composite with dispersed microfibre reinforcement of high-strength steel is a safety element certified by the Military Research Institute s.p. and the State Testing Institute of the Czech Technical University in Prague.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
PYRAMID – SMALL
Edge length: 0.6 m
Level N1G, 3.5 t vehicle at 80 km/h
PYRAMID – MEDIUM
Edge length: 1 m
Level N2, 7.5 t vehicle at 80 km/h
PYRAMID – LARGE
Edge length: 1.35 m
Level N3, 7.5 t car at 80 km/h
Previous
Next
TO CONTROL THE PERIMETER OF INTEREST
CHECKPOINT
Defence industry | Critical infrastructure | Civil defence
To strengthen the defence of the state border, reinforce the outer perimeters of military and civilian airports, reinforce the defence of bridges and important transit lines, reinforce the defence of critical and civilian infrastructure.
Ability to respond quickly to defined threats in the event of an emergency, national emergency, and state of war.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
Dimensions of the basic segment:
Clear width: 2.5 m
Clear height: 2.5 m
Length: 2 m
Wall thickness: 20 cm
Length of segment + lid: 3 m
Weight of base segment: 9.8 t
Total weight: 10.5 t
Capacity: 1-3 men
Assembly: up to 2 h by one team
Crane 10 t, transport one freight wagon.
Shotguns and portholes without fittings.
The basic skeleton can be equipped according to the client’s requirements (beds, benches, chemical toilet, cartridge traps, ammunition and food storage boxes).
Previous
Next
MOBILE BUNKER WITH THREE LOOPHOLES
MILITARY LIGHT
The mobile bunker is a composite made of ultra-high performance concrete with dispersed microfiber reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC high strength steel.
Ability to respond quickly to defined threats in the event of an emergency, national emergency, and state of war.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
Clear width: 2.5 m
Clear height: 2,5 m
Length: 2 m
Wall thickness: 20 cm
Length of 5 segments: 10 m + lids (total 10.5 m)
Weight of base segment: 9.8 t
Total weight: 50 t
Capacity: 8-10 men
Assembly: within 24 h by one team
Crane 10 t, transport one freight wagon.
Shotguns and portholes without fittings.
The basic skeleton can be equipped according to the client’s requirements (beds, benches, chemical toilet, shell traps, ammunition and food storage boxes, compressed air bottles and breathing apparatus).
Previous
Next
TO RESCUE THE CREW
PANIC ROOM
Panic Room is a composite made of ultra-high-value concrete with dispersed microfiber reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC high strength steel.
Ability to respond quickly to defined threats in the event of an emergency, national emergency, and state of war.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
Clear width*height: 2,5*2,5 m
Length: 2 m
Wall thickness: 20 cm
Length of segment + lid: 3 m
Weight of base segment: 9.8 t (total 12 t)
Capacity: 1-3 men
Bulletproof armoured door and escape hatch.
On-site assembly within 24 h, connection to power; in case of their disablement, separate island system for 48-72 h
Crane 10 tons, transport one freight car or truck.
The basic skeleton can be equipped according to the client’s requirements:
- Ventilation or filter ventilation, first-class filtration against combat gases or nuclear fallout, in case of power failure on manual drive
- Air heating
- Back-up breathing from compressed air cylinders
- Anti-blast valve
- Beds, benches, chemical toilet
- Canisters for water and dehydrated food supplies
- Sensor, CO₂
- Camera system;
- Connection to the surrounding broadcasting station;
- Two main and one backup battery;
- Generator to recharge the batteries, exhaust with check valve;
- Fire and gas sensors;
- Fire extinguisher, first aid kit;
- Individual equipment according to the client’s request.
Previous
Next
SECURITY OF REAR STATIONS
DEFENSE MOBIL
Defence industry
The Emergency Shelter is a composite made of ultra-high performance concrete with dispersed microfiber reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC high strength steel.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
Dimensions of the basic segment:
Clear width: 2.5 m
Clear height: 2.5 m
Length: 2 m
Wall thickness: 20 cm
Length of 5 segments: 10 m + lids (total 10.5 m)
Weight of base segment: 9.8 t
Total weight: 50 t
Capacity: one team of 8-10 men
Assembly: within 24 h by one team
Crane 10 t, transport one freight wagon.
- EMERGENCY
- SHELTER
- WAREHOUSE
- HEADQUARTERS, NEWS, INTELLIGENCE AGENCY
- ACCOMMODATION FOR FIRST LINE CREWS
- A HARDENED PART OF A MOBILE HOSPITAL
- GENERATORS
- SUPPLY DEPOT
- LAUNDRY
Previous
Next
TO SEIZE OBJECTS OF UNKNOWN ORIGIN
CIRCLE SHIELD
The Circular Shield restraint segment system consists of a composite made of ultra-high performance concrete with dispersed microfibre reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC high strength steel.
The safety element is a casting made of UHPFRC concrete composite with dispersed microfibre reinforcement of high-strength steel, it is a safety element certified by the Military Research Institute s.p. and the State Testing Institute of the Czech Technical University in Prague.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
ROUND SHIELD – SMALL
Medium Ø: 1 m
Wall height: 530 mm
Segment weight: 170 kg
CIRCULAR SHIELD – LARGE
Medium Ø: 2 m
Wall height: 1,130 mm
Segment weight: 461 kg
Previous
Next
TO REPAIR THE SURFACE OF A RUNWAY OR MOTORWAY SURFACE
MIXTURE OF UHPFRC
Defence industry | Critical infrastructure
The UHPFRC mix can be used to create a composite made of ultra-high performance concrete with dispersed microfiber reinforcement of ULTRA HIGH PERFORMANCE FIBER REINFORCED CONCRETE-UHPFRC.
- Balistic resistance A5
- Shrapnel resistance C4
- Blast resistance D6
- It speeds up the repair process and reduces lead times.
- Saves on the number of staff required.
- Saves money by reducing lead times and staff.
- Resists tensile stress even after a crack has formed.
- Omnidirectional dispersion of reinforcement, mechanical resistance the same in all directions.
- Tough material resistant to dynamic effects.
- Lower volume changes from shrinkage.
- Excellent resistance to sanitation.
- Runway with the highest residual strength requirement of Class A.
- For civil and military airports. Designed for rapid repair of damaged runways.
- In plastic 30 kg bags with plastificker and processing instructions.
